Thursday, 14 March 2019

How to Unlock Ooredoo OMAN Huawei E5172 (E5172s-927 ) CPE Ooredoo OMAN 4G LTE WiFi router and use Any Sim Service Permanently - Worldwide:




Unlock code for E5172s-927 CPE Ooredoo OMAN 4G LTE, use any sim card E5172s-927 CPE Ooredoo OMAN 4G LTE, How to Unlock E5172s-927 CPE Ooredoo OMAN 4G LTE, change sim E5172s-927 CPE Ooredoo OMAN 4G LTE router use other country operators

Recently This operator lauched E5172s-927 CPE Ooredoo OMAN 4G LTE Router, here the problem is we cant use another operators here, but we provide here how to use other operators for any country , worldwide



Ooredoo LTE CPE E5172 ( E5172s-927 )

LTE CPE150Mbps LTE Cat4 CPE

LTE FDD/TDD/UMTS/GSM
DL 150Mbps/UL 50Mbps@20MHz(FDD)
DL 112Mbps/UL 10Mbps@20MHz(FDD)
Wi-Fi 802.11 b/g/n, up to 32 devices

Firmware Version v200R001C115S9400

Software build 2/16/2015 16:52:55


Getting to Know Your CPE

Note:
 The CPE function descriptions and illustrations in this document are for your reference only. The product
you have purchased may vary.


1 Power indicator

 Steady blue: The device is powered on. The power adapter is in use and working properly, or the power
adapter is not in use but the battery level is high.

2 Alternating blue and pink: The device is powered on. The power adapter is not in use or not working
properly, and the battery level is low.

3
 Steady pink: The device is malfunctioning.
Note:
 If your device malfunctions, power it off. Wait at least 15 minutes before you power it on again. If the
problem persists, contact your dealer.
Off: The device is powered off.

2 WLAN indicator

 On: WLAN function enabled
 Blinking: Transmitting data through WLAN
 Off: WLAN function disabled

3 WPS indicator

 On: WPS function enabled
 Blinking: WPS interconnection verification is in progress. This process should not take longer than 2
minutes.
 Off: WPS function disabled

4 LAN indicator

 On: The port is connected to a device.
 Blinking: Data is being transmitted through the port.
Off: No device is connected to the port.

5 Voice indicator

 On: Off-hook condition
 Blinking: Incoming call
 Off: On-hook condition

6 Signal indicator

On: Indicates network signal strength. Full light indicates strong signal.
 Off: No network signal.

7 WLAN button

Press and hold for more than 2 seconds to enable or disable the WLAN function.

8 Reset button

Press and hold for more than 2 seconds to restore the device to its factory settings.

Note:
 Restoring the default settings of the CPE will override all the previous settings.

9 WPS button

4
After the WPS function is enabled, press and hold this button for more than 2 seconds to initiate WPS
interconnection.

10 External antenna port

Connect to an external antenna.

11 Power button

Press this button to power the device on or off.

12 Power port

Connect to the device's power adapter.

13 LAN port

Connect to computers, switches, or other network devices.

14 TEL port

Connect to a phone.

15 USIM card slot

Accommodate a USIM card.

16 Battery compartment

Install the battery.

17 Battery port

Insert the battery connection cable.

18 Back cover

How to Unlock Huawei E5172s-927 CPE Ooredoo OMAN 4G LTE  Mobile WiFi router and use Any Sim Service Permanently - Worldwide:


1. Make sure your Huawei E5172s-927 CPE Ooredoo OMAN 4G LTE Mobile WiFi router is atleast 30 % charged.( OR ) Connected to power suppyly 

2. Just insert a non acceptable Network sim on your E5172s-927 CPE Ooredoo OMAN 4G LTE router SIM card slot. (You have to use another network provider sim, which is currently locked to).

3. After changing the another network providers sim on your Huawei WiFi / MiFi switch the device on. It will display “Invalid SIM” because you have used another network providers sim.

4. Now just establish a WiFi connection to Huawei E5172s-927 CPE Ooredoo OMAN 4G LTE WiFi MiFi router with your PC / IPAD / IPHONE / Android Device.

5. Connect your E5172s-927 CPE Ooredoo OMAN 4G LTE with PC and login to your device’s dashboard at 192.168.1.1/simlock.asp OR 192.168.1.1 OR 192.168.8.1. Go to Advanced Settings – SIM Settings – Unlock Device – Enter Unlock Code – Click on Apply.



or

Open your Settings – Dial-up – Unlock SIM card – Enter 8 digits unlock code (NCK Code) in your Huawei E5172s-927 CPE Ooredoo OMAN 4G LTE WiFi MiFi router. Click OK and the device will reboot to display the new network.


Note :  Dont Enter Wrong Code to Your huawei E5172s-927 CPE Ooredoo OMAN 4G LTE WiFi Mobile Router , If u Enter wrong, Your device will be locked permanently